By harnessing technology and engineering advancements, Crown has redefined the narrow-aisle reach truck. With Crown’s exclusive MonoLift Mast, this lift truck delivers unprecedented height – up to 505” – along with superior visibility, greater capacity at height, game-changing speed/efficiency, and enviable operator comfort.
The Crown RM/RMD Series narrow-aisle reach truck offers unmatched, all-around visibility – at ground level, eye level, height and in all directions around the operator.
With game-changing height, greater capacity and a smaller footprint, you can make the most of every square foot.
Extended loads put tremendous pressure on masts. Crown addresses this challenge with patented, boxed-in cross section mast, which significantly reduces twisting and flexing, associated with conventional, dual upright masts.
Capacity is often the compromise in deep reach applications. The RM/RMD Series reach forklift offers optimized weight distribution and stable MonoLift Mast for superior capacity without a wider wheelbase.
The RM/RMD Series reach truck from Crown boasts incredible travel, lift and lower speeds that equate to reduced cycle times and measurable productivity gains.
Regenerative lowering captures lost energy and returns it to the battery, equating to fewer battery changes, longer shifts and reduced costs.
Crown’s Xpress Lower technology increases top lowering speed 110 feet per minute to 240 feet per minute while using no additional energy. With twice the lowering speed, the RM/RMD Series delivers a boost in throughput.
Ergonomic excellence ensures operator comfort, safety and productivity, even in the most challenging environments.
Crown’s exclusive OnTrac Anti-Slip Traction Control system greatly reduces tire spin during acceleration, plugging and braking for optimized performance – even on wet, slick or dusty surfaces. The Entry Bar Safety Switch encourages safe foot position within the operator compartment by reducing travel speed, sounding an audible alert and showing a message on the display when depressed.
The RM Series is a stand-up reach truck that features a MonoLift mast. It can handle a variety of load sizes and stack in aisles as narrow as 8 feet.
Download Specifications Download Brochure
Load Capacity
4,500 lb
Power (Electric)
36 volt / 930 - 1240 Ah
Head Length
56 - 60.4 in
Max Lift Height
400 in
The RMD Series is the only narrow-aisle stand-up reach truck with a MonoLift mast. The forks extend to allow the truck to deposit or retrieve pallets that are positioned in the rack two deep.
Download Specifications Download Brochure
Load Capacity
3,200 lb
Power (Electric)
36 volt / 930 - 1,240 Ah
Head Length
60.9 - 65.3 in
Max Lift Height
400 in
A large floor surface and adjustable seat make the RM an "S" class series. This sit-down reach truck allows operators to sit, stand or lean comfortably.
Download Specifications Download Brochure
Load Capacity
4,500 lb
Power (Electric)
36 volt / 930 - 1,395 Ah
Head Length
62.4 - 64.9 in
Max Lift Height
505 in
The RMD Series is an "S" class rider deep reach truck with MonoLift mast. The large floor surface and seat make the "S" class task-friendly, comfortable and productive.
Download Specifications Download Brochure
Load Capacity
3,200 lb
Power (Electric)
36 volt / 930 - 1,395 Ah
Head Length
67.3 - 70.8 in
Max Lift Height
505 in
V-Force Lead-Acid Batteries offer the advantages of lower initial cost than other battery technologies and proven, trusted performance for light to heavy duty cycles, from one to three shifts. With proper maintenance, they can support conventional, opportunity and fast charging, delivering reliable energy when it’s needed.
V-Force Lithium-Ion Energy Storage Systems can improve performance and productivity, with technology that provides more consistent power output throughout the entire battery discharge cycle. Shorter recharge times and better charge acceptance characteristics make them great alternative power solutions for opportunity and fast charging applications.
Xpress Lower enables the operator to more than double traditional lowering speeds, saving time and boosting productivity.
The camera and color monitor provides significant visibility improvements for the operator at height.
The laser fork guide enables the operator to easily position the forks at height for increased precision, productivity and safety.
The quick change load wheel assembly utilizes a patented design that enables technicians to replace wheels in 2.5 minutes compared to 30-40 minutes for traditional replacements.
Work Assist Accessories are designed to make the operator's job faster, easier and more productive.
Extended warranty options for major components and wearables offer long-term protection and peace of mind. Choose from coverage up to five years that best fits your usage and application.
